Open tenders / Architecture, engineering & surveying
Planned procurement · Notice 103667-2026
NEX26/48 Ballast Tamper Maintenance
- Value
- Value not stated
- Stage
- Early notice
- Where
- North East
- Lots
- 1
- Suitable for SMEs
- Not stated
- Contract
- 7 Feb 2027 – 6 Feb 2030
In plain English
Nexus, the North East's Tyne and Wear transport body, wants a supplier to service, maintain and repair its Plasser 08-275 ballast tamper (a track maintenance machine) in the North East. The contract is for 3 years at fixed cost, with an option for Nexus to extend by up to 12 months.
Good fit for: A specialist engineering firm with fitters experienced in maintaining heavy rail track machinery such as tampers.
- Must respond to machine-stopped failures within 24 hours
Respond to ‘machine stopped’ failures within 24 hours of the initial report.
- May need to provide out-of-hours fitter cover
Provide ‘out of hours’ fitter cover.
Written with AI. Always bid from the official notice.
What the buyer says
Tyne & Wear Passenger Transport Executive (Nexus) owns and operates a Plasser 08-275 Ballast Tamper (known locally as MA60 and referenced as so from this point onwards). MA60 is an eight-axle, diesel hydraulic, self-propelled S&C Ballast Tamper. The machine was delivered to Nexus in 2014 and has since completed 706862 Tamping cycles and has recorded 8938.4 working engine hours, and 6909.9 main engine hours (Information accurate as of October 2026). Nexus will be tendering for a supplier to undertake the required servicing, maintenance and repair of MA60 in accordance with the Vehicle Maintenance Manual. It is expected that all maintenance schedules with the exception of the daily and weekly checks, derogated activities and parts overhaul will be performed by the successful tenderer. This tender opportunity is for a 3-year fixed cost contract for all planned maintenances, as well as a fixed cost for corrective maintenances, emergency repairs and technical back-up, with the option to extend for up to a further 12 months at Nexus’ discretion. MA60 shall be maintained in accordance with its Maintenance Manual NX 08-275-MA60 unless where specified by Nexus. Activities will be grouped by frequency which will be outlined in the tender documents upon release. Additionally, the contractor may be required to: • Undertake specific inspections or investigations outside of the Maintenance Schedule(s), e.g. a condition report for certain machine parts. • Respond to ‘machine stopped’ failures within 24 hours of the initial report. • Provide ‘out of hours’ fitter cover. The cover shall provide a timely response and resolution any emerging ‘reasonably forecastable’ machine faults that occur during that shift.
What happens next
This is an early notice: the buyer is planning a tender, and its documents come when the tender is published. The notice gives the buyer's team as tenders@nexus.org.uk. Read the official notice for the details.
Procedure: not stated. Published 2 Nov 2026.
Similar open tenders
- Masterplan Feasibility Visioning Architect · Science Museum Group · closes 24 Nov
- ITT - Historic England response to the Flooding and Coastal Erosion Risk Management Strategy SEA - UID 395 · Historic England · closes 25 Nov
- 32 Low Complexity MEICA · Northumbrian Water Limited · closes 25 Nov
- Clydach Ironworks – Provision of Engineering, Principal Designer and Project Management roles · Monmouthshire County Council · closes 25 Nov
- Roof/Internal access equipment survey and remediation works Framework · Cardiff University · closes 26 Nov
Want tenders like this, matched to your firm?
Winnable emails the few new tenders that fit you each weekday, with the catch spelled out. £29/month after a 14-day free trial (no card needed).